Valve Unit is intended for measuring the flow rate of gas wells, regulating gas flow, shutting off the well in case of an emergency failure in the pipeline, switching the gas flow from the well to...
Pipeline manifold valves (PMV) is intended for installation on reservoir distribution pipelines of reservoir pressure maintenance systems and serves to distribute and measure the fl...
Chamber of the gate valves of the foam extinguishing station is designed to supply a foaming solution to the protected objects.
Valves of nitrogen fire extinguishing (VNFE) is intended for the automatic supply of nitrogen for fire extinguishing of fire heaters.
Fire equipment storage unit is necessary for storing primary fire-fighting means at industrial sites.
Flammable liquids and chemicals storage unit (FLCSU) is intended for storage of flammable liquids and chemicals in fume hoods and on racks.
Modular cluster pump station (MCPS) is designed for pumping formation and fresh water.
The block pumping station for pumping oil (BPSO) is designed for pumping oil in the systems for collecting and preparing oil.
The pump station is designed to pump stable and unstable condensate.
The block pumping station for pumping water (BPSW) is designed to supply water to the water supply network in an automatic mode, without the constant presence of maintenance personnel.
Mobile separation units (MSU) are designed for initial preparation (separation, cleaning, heating, cooling) and measuring the production of oil and gas wells at various pressures, flow rates; loadin...
The reagent dosing unit (RDU) is intended for the storage and dosed input of scale inhibitors, corrosion inhibitors, paraffin demulsifiers, hydrate formation inhibitors in the pipeline of the oil ...
Block reagent pumping station (BRPS) is designed for mixing depressant and anti-turbulent additives in reagent tanks.
Electrodehydrators (EDH) are designed for deep desalination and dehydration of oil using an AC electric field.
The gas reduction unit (GRB) is intended for:
- reducing the high or medium pressure of a heterogeneous chemical composition of natural gas to the required;
- preliminary cleaning of...
The flare unit (FU) with a control system is designed for the disposal of permanent, periodic, emergency discharges of gases and vapors of gas and oil products in the oil and gas processing, chemical,...
Underground tanks (UC) are used to store and collect residues of oil products at oil and gas enterprises, to store gas condensate, and to drain residues of various corrosive liquids.
Automated technological filtering unit based on the principles of artificial intelligence (BTF), is designed to purify liquids, gas and gas condensate from mechanical impurities and produced water...
The filtration unit (FPP) is designed to clean oil products from mechanical impurities, free water, foreign objects and scale.
Hydrocyclone cartridge filter (FHC) is designed to purify liquids, gas and gas condensate from mechanical impurities and produced water in order to protect the components of the technological system...
Drainage liquid mesh filters (FDL) designed to purify liquids pumped at the enterprises of the oil, gas, chemical, petrochemical, mining industries, as well as housing and communal services from mechanical...
The filter-water separator (FW) is intended for purification of light oil products (gasoline, kerosene, diesel fuel and jet engine fuel) from mechanical impurities, low-temperature formations and ...
The gas mesh filter (FGM) is intended for the purification of natural and liquefied hydrocarbon gases for industrial and municipal purposes, as well as other non-aggressive gases from mechanical impurities,...
Vertical dirt filter (TVD), designed to purify the pumped oil and other liquid products from mechanical impurities, foreign objects, clay, paraffin-tar deposits and scale, installed on the pipelines o...
The sucker rod pump filter (FSHGN) is designed to clean the produced reservoir fluid from rock and mechanical impurities, to protect against mechanical wear, contamination and premature failure of ...
Compressor industrial equipment is designed to compress (prepare and compress) air, natural gas, associated petroleum gas, and provide compressed air to the technological processes of industrial...
Tapered driven metal piles are a reliable, fast and inexpensive solution for installing a foundation of any degree of complexity.
A screw pile is an element of a pre-fabricated foundation, immersed in almost any soil. Such piles are made of steel pipe of various diameters with special blades for screwing into the array both...
Tips for piles are made of steel pipes of standard diameters from 108 to 630 mm.