Pipeline manifold valves (PMV) is intended for installation on reservoir distribution pipelines of reservoir pressure maintenance systems and serves to distribute and measure the flow rate, pressure and temperature of the process water pumped into injection wells.
Pipeline manifold valves (PMV) is intended for installation on reservoir distribution pipelines of reservoir pressure maintenance systems and serves to distribute and measure the flow rate, pressure and temperature of the process water pumped into injection wells.
The flow rate of water passing through each PMV discharge pipe is measured using flow sensors. Measuring instruments are installed in a special cabinet or in a local automation unit. Pressure monitoring and measurement for each PMV discharge pipeline is carried out using technical pressure gauges.
Shelter blocks are equipped with an electric heating, air conditioning, ventilation, gas control system and fire alarm sensors.
Specifications.
Full service life, not less than 20 years
|
Parameter |
Value |
|
Operating Mode |
Continuous |
|
Type of facility |
Block box |
|
Installation |
On the foundation (tape, pile, slab, etc.) |
|
Working pressure, MPa |
16.0; 21.0; 25.0 |
|
Nominal diameter of the inlet pressure manifold, mm |
150, 200, 250, 300 |
|
Nominal diameter of the outlet discharge manifolds, mm |
80, 100 |
|
The number of outlet pipes, pcs |
3, 4, 5, 6, 7, 8 |
|
Nominal diameter of the drainage line, mm |
50 |
|
Voltage in electric networks, |
V 380/220 |
|
Heating |
Electric or water |
|
Temperature control range inside the block box, in winter 0С |
From plus 5 to plus 18 |
|
Full service life |
not less than 20 years |
Design and manufacture of PMV is carried out taking into account the parameters of the pumped medium, the required performance and pressure, operating conditions and individual customer requirements.
