The block pumping station for pumping water (BPSW) is designed to supply water to the water supply network in an automatic mode, without the constant presence of maintenance personnel.
The block pumping station for pumping water (BPSW) is designed to supply water to the water supply network in an automatic mode, without the constant presence of maintenance personnel.
BPSW consists of units and blocks of full factory readiness, mounted in the room of the block box, and comes with a full set of consumables, life support systems, spare parts and operational documentation.
The pumping station equipment is operated in a room with an air temperature of at least 5-100 ° C at the floor level, which is provided by electric heating, the heating devices of which are equipped with temperature regulators, and a thermal curtain above the entrance.
A permanent natural supply and exhaust ventilation of the premises through deflectors and louvres with valves is provided in the room of the pumping station.
Pumps for supplying water to the water supply system operate in automatic mode.
The pump station is equipped with a local control system.
The ACS of the pumping station monitors and transmits all the necessary parameters to the AWS of the ACS TP.
An automatic system of pre-launching of pumping units is provided.
Technological equipment of the pumping station is located in a closed heated block-type building.
Design and manufacture of BPSW is carried out taking into account the parameters of the pumped medium, the required productivity and pressure, operating conditions and individual customer requirements.
