Address:
23 H. Davletshinoy st.
Ufa, Russia
RUS EN Ir
+7 (347) 253 87 13 Opening hours:
Mon-Fri from 09:00 to 18:00 (UTS/GMT+5)
Request a call

4.2 The filtration unit for the purification of petroleum products

4.2 The filtration unit for the purification of petroleum products

The filtration unit (FPP) is designed to clean oil products from mechanical impurities, free water, foreign objects and scale.

If you have questions , leave a request:




The filtration unit (FPP) is designed to clean oil products from mechanical impurities, free water, foreign objects and scale.

FPP installation is provided on the open area. Climatic modification - U1.

FPP is designed to isolate a fine solid fraction from a liquid (oil product), at a nominal pressure of 1.6; 2.5; 4.0; 6.3 MPa, at a temperature of the transported liquid from minus 20 to plus 40 ° C.

Filters and FPP, depending on the macroclimatic area of ​​accommodation should be made in two versions:

- in a macroclimatic area with a cold climate and outdoor seating with a possible range of ambient temperatures from minus 60 to plus 40 ° C, CL performance, placement category 1;

- in a macroclimatic region with a temperate climate and outdoor seating with a possible range of ambient temperatures from minus 40 to plus 40 ° C, design U, placement category 1.

Filters and FPP, depending on the seismicity of the location area (on the MSK-64 scale), are made in 2 versions:

- not earthquake-resistant design for areas with earthquake resistance on the MSK-64 scale up to 6 points inclusive - C0;

- earthquake-resistant design for areas with earthquake resistance on the MSK-64 scale from 6 to 9 points, inclusive, when replacing pillars with cylindrical pillars (C).

The performance of FPP filters depends on the cell size of the filter element of the filters (filter fineness). The nominal filtration fineness is indicated when ordering the FPP, based on the conditions and parameters of the working medium, taking into account the maximum allowable pressure drop across the filter, with the provision of particle size analysis of mechanical impurities in the oil product to FPP.

Design and manufacture of FPP is carried out taking into account the parameters of the pumped medium, the required productivity and pressure, the nominal fineness of filtration, operating conditions and individual customer requirements.


back to the list